Basically 1 BTU will move 1 pound of water 1 degree Fahrenheit. There are 8.35 lbs in 1 gallon. There are 8.35*5=41.75 lbs in 5 gallons. To take water from 75 to 212 therefore requires: (212-75)*41.75=5720 BTU.
How many BTU does it take to boil 1 gallon of water?
One BTU is the amount of heat energy required to raise one pound of water by 1ºF. Water weighs 8.33 pounds per gallon so we can calculate that one gallon of water requires 8.33 BTU to raise the temperature 1ºF.
How many BTU do I need to boil water?
You have all heard of the BTU of heat energy (British Thermal Unit), it takes one BTU to raise one pound of water one degree Fahrenheit. So if the water in the pan on the stove is put in at 32°F, it will then require 180 BTU’s to bring the water to boiling temperature, or 212°F.
How fast will 15 000 BTU boil water?
On a 15,000 BTU burner, with water starting at 50°F it would take 12-15 minutes for 6 quarts (1.5 gallons) of water to boil. And 20-25 minutes to bring 12 quarts (3 gallons) of waters to a boil.
How many BTU does it take to boil 20 gallons?
Water that is at boiling has 180 btus in it, per lb. That means 20 gallons as accumulated about 120,000 btu.
How many BTU do I need for a shrimp boil?
For backyard use, he recommends a 50,000 BTU burner and a regulator, a safety device that goes between the tank and the burner that will stop the flow of propane if the line ruptures. The height of the burner is important, too. It should not have a high center of gravity in case anybody bumps into it.
Is 18000 Btu enough for cooking?
Middle: 2,000–10,000 BTUs. Mid-range BTUs are good for everyday cooking like sauteing and frying. High: 12,000–18,000 BTUs. These high BTU burners are meant for high heat cooking like searing and stir-frying.
How long does it take to boil off a gallon of water?
If you are boiling water on a usual stove in a tank that conducts heat well, then it will take you approximately one hour to see the one gallon of water (if the water was cold when you started to simmer it).
How many BTUs do I need for cooking?
For most users, one power burner (12,000 BTUs or higher) is more than adequate—especially when paired with two medium-strength burners and one low burner for simmering. If you do a lot of cooking that requires quick high heat, such as stir-frying or searing, you may want to push the power up.
How many BTU is my range?
A home stove has, on average, about 7000 BTUs per burner. Some burners are lower, designed for simmering and low-heat cooking, and may put out 3000 to 5000 BTUs. And there may be one monster burner on a range that goes up to 12,000.
Does salt boil water faster?
Adding salt to water is going to do two things to water’s physical properties: it will raise the boiling point and it will lower the specific heat. These two changes actually work against each other. Raising the boiling point will make the water boil slower.
Does water boil faster with a lid?
So put a lid on the pan. The air in the pan will heat up as the water heats up, and it circulates back into the water as it’s heated. This helps bring the water to 212 degrees F more quickly.
How many BTUs is a wok burner?
Most modern stoves have a range of gas rings, and usually one (near the front) that’s bigger than the rest. Sometimes it’s even called a ‘wok burner’. Your stove wok burner produces about 12–15K BTU.
What’s the meaning of BTU?
A British thermal unit (Btu) is a measure of the heat content of fuels or energy sources. It is the quantity of heat required to raise the temperature of one pound of liquid water by 1 degree Fahrenheit at the temperature that water has its greatest density (approximately 39 degrees Fahrenheit).