So 0 degrees C is 273 degrees Kelvin. What c in the equation is, the specific heat capacity. So in water it takes 1200 joule’s to raise a Kg of water by 1 degree K or in degrees C. If this takes 1 min to boil the power required to boil the water equals 96kilo joules/60 seconds =1600 watts or 1.6 kilo watts.

## How many joules does it take to boil 1 gram of water?

The specific heat of water is 1 calorie/gram °C = 4.186 joule/gram °C which is higher than any other common substance. As a result, water plays a very important role in temperature regulation. The specific heat per gram for water is much higher than that for a metal, as described in the water-metal example.

## How much energy does it take to boil water?

Phase changes in pure water occur at a specific temperature. At 1 atm, water freezes at 0° C and boils at 100° C. The energy required to change water from a liquid to a solid is 333.7 kJ/kg while the energy required to boil water is 2257 kJ/kg.

## How many joules does it take to heat water?

Precisely, water has to absorb 4,184 Joules of heat (1 calorie) for the temperature of one kilogram of water to increase 1°C. For comparison sake, it only takes 385 Joules of heat to raise 1 kilogram of copper 1°C.

## How many joules does it take to boil a kettle?

The power reading in watts is the energy in joules transferred electrically in one second by the heating element circuit. For the small kettle the rate is about 1,000 joules per second. For large the kettle it is close to 3,000 joules per second.

## How many joules does it take to melt 1 gram of ice?

A total of 334 J of energy are required to melt 1 g of ice at 0°C, which is called the latent heat of melting. At 0°C, liquid water has 334 J g−1 more energy than ice at the same temperature.

## How do you calculate joules?

In words: Work is equal to the force that is exerted times the distance over which it is exerted. In equation form: work (joules) = force (newtons) x distance (meters), where a joule is the unit of work, as defined in the following paragraph.

## Is it cheaper to boil water with gas or electric?

Based on the above answers and examples, to boil 1 litre of water from 20C to 100C, requiring 0.183 kWh of either electricity or gas, at todays energy prices GAS is 68% cheaper than electricity.

## What is the most energy efficient way to boil water?

For appliances – microwave, electric tea kettle, electric stovetop – the most efficient appliance is the one that can boil water while pulling in the least amount of electricity via its plug.

## Is it cheaper to heat water with gas or electric?

Gas is much cheaper than electricity if you are using it to heat the same amount of water. But some immersion heaters only heat water at the top part of the tank, so if that ‘sometimes only once a week’ demand for water is just for a small amount, the immersion heater could still be cheaper to run!

## What is Q MC ∆ T used for?

Q=mcΔT Q = mc Δ T , where Q is the symbol for heat transfer, m is the mass of the substance, and ΔT is the change in temperature. The symbol c stands for specific heat and depends on the material and phase. The specific heat is the amount of heat necessary to change the temperature of 1.00 kg of mass by 1.00ºC.

## How many joules did the water absorb?

1 Answer. Ernest Z. (a) The water absorbed 1670 J.

## How much energy in joules is there in 1g of coal?

Combustion of 1 gram of natural gas produces 54 kJ of energy. Similarly, the combustion of 1 gram of petrol (gasoline) produces 48 kJ of energy.

…

Energy Output of Fuels.

Fossil Fuel | (non-renewable) | brown coal |
---|---|---|

Heat Content | kJ g-1 | 16 |

MJ tonne-1 | 16 000 | |

Renewable Fuel | biogas | |

Heat Content | kJ g-1 | 26 |

## What temperature do kettles boil to?

The boiling point of water changes depending on altitude or the amount of impurities in the water, so a thermostat that stops boiling the water at exactly 100°C presents a problem. At sea level, water boils at 100°C, but for every 150-metre increase in elevation, water’s boiling point lowers by approximately 0.5°C.

## Is boiling water in an electric kettle safe to drink?

The government is to launch research into whether using boiled water from old-style electric kettles is worsening skin allergies through nickel leaching off exposed elements. … Those who filter their water first might be exposing themselves to the greatest risk.

## How fast do electric kettles boil water?

The electric kettles bring the water to a boil in about 4 to 5½ minutes while the gas stovetop takes a little over 4½ minutes and our microwave clocks in at 6 minutes and 45 seconds.